KFO SERIES
Main Characteristics:
• overprintable with both conventional and most of UV inks
• fine definition with consistent release
• high gloss on board coverage
• special-purpose foil for cold foiling without die
Recommended Applications:
• applicable on suitable modified reel-to-reel label presses
• applicable on a wide range of non-absorbent surface papers and all types of label stock. PP, PE, label films: 3.0-6.0 g/m², non-absorbent surface papers: 6.0-8.0 g/m².
Stamping Conditions:
• wet process: 40-120 m/min with higher than 180 watts/cm (450 watts/inch) UV lamp
KF SERIES
Main Characteristics:
• high operating speed
• fine definition with consistent release
• good halftone effects
Recommended Applications:
• applicable on suitable modified reel-to-reel label presses
• applicable on a wide range of non-absorbent surface papers and all types of label stock. PP, PE label films: 2.5-5.0 g/m2, non-absorbent surface papers: 5.0-7.0 g/m2
• ensure the hardness of nip roller is between 85 to 90 shore A hardness
Stamping Conditions:
• wet process: 50-90 m/min with higher than 180 watts/cm (450 watts/inch) UV lamp
KOO + SERIES
Main Characteristics:
• fine definition with easy release
• high gloss on board coverage
• good overprintability with conventional inks
Recommended Applications:
• wide range of coated and uncoated paper and carton, on the offset presses coild foil modul
Stamping Conditions:
• Sheet-feed offset cold foil stamping applications by conventional adhesive. Operating speed over 8000 sheets/hr up to 10000 are possible.